Berikut Biografi Ahmad Indra Siswantara, atau lebih dikenal Prof. DAI
Full Name : Prof. Ir. Ahmad Indra Siswantara, Ph.D.
Place/Date of Birth : Mataram, 11 Juni 1967
Address : Jl. KHM USMAN No. 22 A, Kukusan, Beji, Depok
email : a_indra@eng.ui.ac.id, ahmad.insiswantara @ui.ac.id, ahmadindrasiswantara@gmail.com
Professional and Academic Experience
- 2025-present, Professor in CFD, Department of Mechanical Engineering University of Indonesia
- 1991-present, Academic Staf at Department of Mechanical Engineering University of Indonesia
- 1997 – present, Developer of CFDSOF (3D General Purpose CFD Code/Software)
- 2002 – present, Founder & CEO of CCIT Group Indonesia
- 1991 – present, Head of Ahmad Indra Research (AIR) Group, University of Indonesia
- 2021, Inovator MRPP (Mobile Refinery Power Plant)
- Project Leader Computational Fluid Dynamics (CFD) Simulation of Hydrology and Hydraulics Supadio Airport,
PT Angkasa Pura - Project Leader Computational Fluid Dynamics (CFD) Simulation Air PreHeater, PLN Pusharlis
- Project Leader CFD of Cooling Water System : “Thermal Dispersion of PLTU Lontar”, PLNE
- Project Leader CFD of Warm Water Channel: “Mathematical Modelling Study of the Debreeze Reclamation
Effect on Cooling Water Discharge of PLTU Muara Karang”, PT Taman Harapan Indah - Project Leader CFD Simulation: “Analysis Thermal Dispersion & Analysis Fly Ash Dispersion of PLTU I West
Kalimantan”, PT Praba Indo Persada - Project Leader CFD Simulation: “Evaluasi CFD & Redesign CO2 Stripper Reboiler 61-105 C”, PT Pupuk
Iskandar Muda (PIM) - Project Leader CFD Project : “Kajian Sebaran Panas dan Sedimentasi Akibat Rencana Baru Reklamasi
Pantura Jakarta terhadap Sistem Pendingin PLTU/ PLTGU Muara Karang dan Priuk” and “Kajian Sebaran
Panas dan Sedimentasi terhadap Sistem Pendingin PLTU/PLTGU Muara Karang dan Tanjung Priok pada
Kondisi Saat ini (Existing Condition)”, PT PLN (Persero) - Project Leader PT Pertamina on “Analisa Pola Aliran Fluida dalam Piping Header Compressor dengan
Simulasi CFD” - Project Leader PT Pertamina on “Assesment Analysis of Reused of Air Cooled Heat Exchanger after Thirteen
Years not Operated” - Project Leader PLTU Riau on “Study of Hydrology and Sedimentation PLTU Riau (Siak River)”
- Project Leader Koperasi Pegawai PLN Sektor Priok on “CFD Analysis of Flame Characteristic Identification on
Dual Fluel Combustion” - Project Leader PT Kelsri on “Singa Pipeline Stress Analysis”
- Project Leader PT Rekayasa Industri on “Simulasi Dispersi Termal Buangan Air Pendingin Suralaya 8:
Rencana Reklamasi Daerah Deflector Termal”, “Re Calculation Thermal Dispersion Study for Additional
Reclamation” and “Calculation Review for Gondola” - Project Leader PT Indonesia Power on “Analisis CFD Nyala Api Pembakaran Dual Fuel PLTGU UBP-Priok”
- Project Leader Ministry of Energy and Mineral Resources on “Blade Design and Aerodynamic Analysis for 100
KW Wind Turbine Project” - Project Leader PT Rekayasa Industri on “Recalculation of Thermal Dispersion Study at Suralaya Power Plant”
- Project Leader PT Lemtek Konsultan Indonesia on “3D Thermal Study and mathematical modelling for Site
Investigation Suralaya Power Plant (2×600 MW) Project” and “Thermal Dispersion Study for Banten Power
Plant” - Project Leader PT PLN Enjiniring on “Coal Wide Range Study for Suralaya Power Plant Unit 1- 7 Project” for
Tokyo Electric Power Services Co., Ltd. (TEPSCO) on “Thermal Dispersion Study of PLTU Muara Karang
Power Plant Project” - Project Leader PT. PLN (Persero) Pusenlis on “Studi Kajian “Pembuatan Kajian Enjiniring Desain Economizer
Hopper & Sistem Penyaluran Abu PLTU Suralaya 8” - Project Leader PT. PLN (Persero) Pusharlis on “Kajian Simulasi Aliran Fluida Pada Boiler Unit #3 PLTU
Jeranjang” - Project Leader PT. Pusaka Jaya Internasional on “Analysis Thermal Dispersion Study PLTU Sofifi”
- Project Leader PT. PJB Unit Pembangkit Muara Karang on “Assessment of Fuel Oil Fire Protection System at
PLTU #4 Muara Karang” - Project Leader PT. PJB Unit Pembangkit Muara Karang on “Kajian Pengaruh Reklamasi di Pantura Jakarta
Terhadap Kelangsungan Operasional Pembangkit Listrik UP Muara Karang” - Project Leader PT. PJB Unit Pembangkit Muara Karang on “Analisis Kerusakan & Redesign LP & HPH”
- Project Leader PT. PJB Unit Pembangkit Muara Tawar on “Kajian Dampak Reklamasi Terhadap Operasional
Pembangkit” - 2020, Inovator FCC Sawit Merah Putih
- 2019, CFD Team Leader in FCC Pilot Plant DED Project, P3TEK, ESDM
- 2011 – 2018, Head of Indonesia National Strandard (SNI)Technical Committee for Renewable Energy
- 2018, Economizer Hopper Design and Analysis Project Leader, PT PJB Unit PLTU Indramayu
- 2017, CFD Analysis in Dam Design in Cieunteh River for Hydro Power Project, PLN Pusharlis
- 2016, Studi dampak reklamasi terhadap kinerja pembangkit di UP Muara Tawar, PT PJB
- 2016, Kajian Awal Cold Element Air Pre-Heater, PLN Pusharlis
- 2015, Studi dampak reklamasi terhadap kinerja pembangkit di UP Muara Karang, PT PJB
- 2015, CFD Simulation of PLTGU Tg. Priok Thermal Dispersion
- 2015, CFD Simulation of Thermal Dispersion for Banggai Ammonia
- 2015, CFD Simulation of Plume Analysis for PLTU Ampana
- 2014, CFD Simulation of Thermal Dispersion for PLTU Bojonegoro 2x1000MW
- 2014, CFD Simulation of Thermal Dispersion for PLTG/MGU Makassar Peaker
- 2013, CFD Simulation of Thermal Dispersion for PLTU Kalbar 1
- 2013, CFD Simulation of Plume Analysis for PLTU Parit Baru
- 2013, CFD Simulation of Thermal Dispersion for PLTU Parit Baru
- 2012, Simulation of Flow Induced Corrosion in Pipe, PT Pertamina
- 2012, Heat Exchanger Tube Failure Analysis and Its Engineering Solution, PT Pupuk Iskandar Muda
- 2012, Surging Analysis and Piping Redesign, PT Pertamina
- 2012, Dynamics Finite Element Analysis of Wind Turbine, P3TEK, ESDM
- 2012, CFD Expert in Simulation of Rob Simulation on Muara Karang PLTU/PLTGU, PusLitBang? PLN
- 2012, CFD Expert in Thermal and Sediment Dispersion Study of PLTU Tarakan 2x7MW, PT Adhikarya
- 2012, CFD Expert in Thermal and Sediment Dispersion Analysis of Pantura Reclamation Effect on Muara
Karang PLTU/PLTGU Cooling Water System Project, PusLitBang? PLN - 2011, Finite Element Analysis of Pipe Bulging, PT PGN
- 2011, CFD Expert in Sediment Dispersion Analysis of Riau Tenayan PLTU Jetty Project, PT Rekayasa Industri
- 2011, CFD Expert in Thermal and Sediment Dispersion Analysis of Pantura Reclamation Effect on Muara
karang and Tanjung Priok PLTU/PLTGU Cooling Water System Project, PusLitBang PLN - 2010, Project Leader in CFD Analysis of Dual Fuel System of Gas Turbine Combustor, UBP Priok PT.
Indonesia Power - 2009, Project Leader in Pipe Stress Analysis (Buried Pipeline), PT Fastrack
- 2009 – Francis Turbin Design and Analysis Using CFD, Consultant and Lead Instructur , PT Poso Energy
(Bukaka Group) - 2009, Pipe Stress Analysis Using CAESAR II : Statics and Dynamics, Consultation and Training, Lead
Instructur, BPTKS (Formerly LUK) BPPT - 2009, Pipe Stress Analysis Using CAESAR II : Statics , Consultation and Training, Lead Instructur, PT. Pupuk
Kaltim - 2010, Project Leader in Reclamation Effect (near Intake Pool) on Cooling Water System Thermal Dispersion
of PLTU Suralaya 8 , PT Rekayasa Industri - 2008-2009, CFD Project Leader : A 100KW Wind Turbine Blade Design and Analysis, P3TKEBT, Departemen
Energi dan Sumber Daya Mineral, Republik Indonesia. - 2000- 2007, Visiting Professor for Graduate Study Program – National Institute of Technology Malang
- 2007-2008, CFD Project Leader : Cooling Water Intake Pool Design and Analysis of A Coal Fired Power Plant
Funded by PT. Rekayasa Industri - 2007, Project Leader in CFD modeling for Cooling Water Intake Pool of PLTU Suralaya 8 , PT Rekayasa
Industri - 2006, Project Leader in CFD modeling for Heat Dispersion in PLTU Pelabuhan Ratu, Sukabumi PT PLN
Engineering - 2006, Project Leader in CFD modeling for Heat Dispersion in PLTU Indramayu , PT PLN Engineering
- 2006, Project Leader in CFD modeling for Heat Dispersion in PLTU Tuban , PT PLN Engineering
- 2006, Project Leader in CFD modeling for Heat Dispersion in PLTGU Teluk Lembu, Jambi LEMTEK FTUI
- 2006, Project Leader in CFD modeling for Heat Dispersion in PLTU Takalar , Centunion (Spain) & PT PLN
Engineering - 2005, Research Supervisor-National? Science and Technology Institute Jakarta
- 2005, Project Leader in CFD modeling for Heat Dispersion in PLTU Muara Karang, TEPSCO (Japan)
- 2005, Project Leader in CFD Modeling of Coal Fired Boiler of PLTU Suralaya, PT Indonesia Power UBP
Suralaya - 2004, Research Supervisor-Indonesia? Institute of Technology
- 2004, Project Leader in the Study of Mathematical Model of Thermal Dispersion in Palu Coastal Area,
IndoPower International - 2004, Project Leader in the Study of Mathematical Model of Thermal Dispersion in Kendari Coastal
Area,IndoPower International - 2004, Project Leader in the Study of Mathematical Model of Thermal Dispersion in Sorong Coastal
Area,IndoPower International - 2004, Project Leader in the Study of Mathematical Model of Thermal Dispersion in Pangkal Balam Coastal
Area,IndoPower International - 2004, Project Leader in the Study of Mathematical Model of Thermal Dispersion in Bangka Coastal
Area,IndoPower International - 2004, Project Leader in the Gas Burner Simulation of Tanjung Priok PLTG Unit, PT Indonesia Power UBP. Tg.
Priok - 2004, Project Leader in Solution of Mathematical Modeling of Thermal Dispersion in Cilegon Coastal Area,
PLN-E - 2003, Chairman of Organizing Committe The 14th International Symposium on Transport Phenomena
(ISTP-14) - 2002 Director of CCIT-FTUI
- 2002,Founded CCIT-FTUI
- 2000, Head of FTUI Computer Centre
- 2001-2003, Research Supervisor-Tarumanegara University
- 2001, Chairman of The 4th Quality in Research
- 2001, External Examiner for Mechanical Engineering Master Degree, University of Tasmania, Australia
- 2001, Organizing Committee Chairman of International Conference on Urbanization in cooperation with The
University of Melbourne, Australia - 2000, Chairman of The 3rd Quality in Research
- 1998-1999, Guest Lecture at Trisakti University
- 1996 – 2004, CFD Lead Instructor, FTUI
- 1996 – 2000, Head of Fluid Mechanics Laboratory, Mechanical Engineering FTUI
- 1996, Guest Lecture at University Technology Malaysia
- 1992 – 1996, CFD Engineers of CFD Development project, University Technology Malaysia
- 1991-1992, Head of Computational Lab. Mechanical Engineering FTUI
- 1991-1992, Laboratory Practice Coordinator, Mechanical Engineering FTUI
- 1991-1992, Training Coordinator, Mechanical Engineering FTUI
- 1989-1991, Technical Assistant in Fluid Mechanics Laboratory, Mechanical Engineering FTUI
Resulting Work : HAKI (Indonesian Patent),Books & Published/Unpublished Papers, Granted Research
Project and Others
- 2014, Pengembangan Turbin Mikro Bio-Energi (Ministry of Education Grant)
- 2014, Turbin Multi-Fluida (HAKI – Registered)
- 2013, Analisis Ilmu Rekayasa (Unpublished-DTM-UI Research Grant)
- 2012, Analisa Boiling Corrosion Pada Alat Penukar Kalor Tipe Shell & Tube dengan Metode CFD, Temu
Ilmiah Nasional Dosen Teknik (TINDT) 2012, Jakarta, Indonesia - 2012, Wind Turbine for Zero Energy Building in Indonesia (DRPM-UI Grant)
- 2011, 100kW Wind Turbine Blade Design (HAKI)
- 2011, Analisis Unjuk Kerja Kompressor Sentrifugal dan Ruang Bakar Turbin Gas Mikro Proto X-1, SNTTM X,
Malang, Indonesia
