ccitonline.com

Berikut Biografi Ahmad Indra Siswantara, atau lebih dikenal Prof. DAI

• 2025-present, Professor in CFD, Department of Mechanical Engineering University of Indonesia
• 1991-present, Academic Staf at Department of Mechanical Engineering University of Indonesia
• 1997 – present, Developer of CFDSOF (3D General Purpose CFD Code/Software)
• 2002 – present, Founder & CEO of CCIT Group Indonesia
• 1991 – present, Head of Ahmad Indra Research (AIR) Group, University of Indonesia
• 2021, Inovator MRPP (Mobile Refinery Power Plant)
• Project Leader Computational Fluid Dynamics (CFD) Simulation of Hydrology and Hydraulics Supadio Airport,
  PT Angkasa Pura
• Project Leader Computational Fluid Dynamics (CFD) Simulation Air PreHeater, PLN Pusharlis
• Project Leader CFD of Cooling Water System : “Thermal Dispersion of PLTU Lontar”, PLNE
• Project Leader CFD of Warm Water Channel: “Mathematical Modelling Study of the Debreeze Reclamation
  Effect on Cooling Water Discharge of PLTU Muara Karang”, PT Taman Harapan Indah
• Project Leader CFD Simulation: “Analysis Thermal Dispersion & Analysis Fly Ash Dispersion of PLTU I West
  Kalimantan”, PT Praba Indo Persada
• Project Leader CFD Simulation: “Evaluasi CFD & Redesign CO2 Stripper Reboiler 61-105 C”, PT Pupuk
  Iskandar Muda (PIM)
• Project Leader CFD Project : “Kajian Sebaran Panas dan Sedimentasi Akibat Rencana Baru Reklamasi
  Pantura Jakarta terhadap Sistem Pendingin PLTU/ PLTGU Muara Karang dan Priuk” and “Kajian Sebaran
  Panas dan Sedimentasi terhadap Sistem Pendingin PLTU/PLTGU Muara Karang dan Tanjung Priok pada
  Kondisi Saat ini (Existing Condition)”, PT PLN (Persero)
• Project Leader PT Pertamina on “Analisa Pola Aliran Fluida dalam Piping Header Compressor dengan
  Simulasi CFD”
• Project Leader PT Pertamina on “Assesment Analysis of Reused of Air Cooled Heat Exchanger after Thirteen
  Years not Operated”
• Project Leader PLTU Riau on “Study of Hydrology and Sedimentation PLTU Riau (Siak River)”
• Project Leader Koperasi Pegawai PLN Sektor Priok on “CFD Analysis of Flame Characteristic Identification on
  Dual Fluel Combustion”
• Project Leader PT Kelsri on “Singa Pipeline Stress Analysis”
• Project Leader PT Rekayasa Industri on “Simulasi Dispersi Termal Buangan Air Pendingin Suralaya 8:
  Rencana Reklamasi Daerah Deflector Termal”, “Re Calculation Thermal Dispersion Study for Additional
  Reclamation” and “Calculation Review for Gondola”
• Project Leader PT Indonesia Power on “Analisis CFD Nyala Api Pembakaran Dual Fuel PLTGU UBP-Priok”
• Project Leader Ministry of Energy and Mineral Resources on “Blade Design and Aerodynamic Analysis for 100
  KW Wind Turbine Project”
• Project Leader PT Rekayasa Industri on “Recalculation of Thermal Dispersion Study at Suralaya Power Plant”
• Project Leader PT Lemtek Konsultan Indonesia on “3D Thermal Study and mathematical modelling for Site
  Investigation Suralaya Power Plant (2×600 MW) Project” and “Thermal Dispersion Study for Banten Power
  Plant”
• Project Leader PT PLN Enjiniring on “Coal Wide Range Study for Suralaya Power Plant Unit 1- 7 Project” for
  Tokyo Electric Power Services Co., Ltd. (TEPSCO) on “Thermal Dispersion Study of PLTU Muara Karang
  Power Plant Project”
• Project Leader PT. PLN (Persero) Pusenlis on “Studi Kajian “Pembuatan Kajian Enjiniring Desain Economizer
  Hopper & Sistem Penyaluran Abu PLTU Suralaya 8”
• Project Leader PT. PLN (Persero) Pusharlis on “Kajian Simulasi Aliran Fluida Pada Boiler Unit #3 PLTU
  Jeranjang”
• Project Leader PT. Pusaka Jaya Internasional on “Analysis Thermal Dispersion Study PLTU Sofifi”
• Project Leader PT. PJB Unit Pembangkit Muara Karang on “Assessment of Fuel Oil Fire Protection System at
  PLTU #4 Muara Karang”
• Project Leader PT. PJB Unit Pembangkit Muara Karang on “Kajian Pengaruh Reklamasi di Pantura Jakarta
  Terhadap Kelangsungan Operasional Pembangkit Listrik UP Muara Karang”
• Project Leader PT. PJB Unit Pembangkit Muara Karang on “Analisis Kerusakan & Redesign LP & HPH”
• Project Leader PT. PJB Unit Pembangkit Muara Tawar on “Kajian Dampak Reklamasi Terhadap Operasional
  Pembangkit”
• 2020, Inovator FCC Sawit Merah Putih
• 2019, CFD Team Leader in FCC Pilot Plant DED Project, P3TEK, ESDM
• 2011 – 2018, Head of Indonesia National Strandard (SNI)Technical Committee for Renewable Energy
• 2018, Economizer Hopper Design and Analysis Project Leader, PT PJB Unit PLTU Indramayu
• 2017, CFD Analysis in Dam Design in Cieunteh River for Hydro Power Project, PLN Pusharlis
• 2016, Studi dampak reklamasi terhadap kinerja pembangkit di UP Muara Tawar, PT PJB
• 2016, Kajian Awal Cold Element Air Pre-Heater, PLN Pusharlis
• 2015, Studi dampak reklamasi terhadap kinerja pembangkit di UP Muara Karang, PT PJB
• 2015, CFD Simulation of PLTGU Tg. Priok Thermal Dispersion
• 2015, CFD Simulation of Thermal Dispersion for Banggai Ammonia
• 2015, CFD Simulation of Plume Analysis for PLTU Ampana
• 2014, CFD Simulation of Thermal Dispersion for PLTU Bojonegoro 2x1000MW
• 2014, CFD Simulation of Thermal Dispersion for PLTG/MGU Makassar Peaker
• 2013, CFD Simulation of Thermal Dispersion for PLTU Kalbar 1
• 2013, CFD Simulation of Plume Analysis for PLTU Parit Baru
• 2013, CFD Simulation of Thermal Dispersion for PLTU Parit Baru
• 2012, Simulation of Flow Induced Corrosion in Pipe, PT Pertamina
• 2012, Heat Exchanger Tube Failure Analysis and Its Engineering Solution, PT Pupuk Iskandar Muda
• 2012, Surging Analysis and Piping Redesign, PT Pertamina
• 2012, Dynamics Finite Element Analysis of Wind Turbine, P3TEK, ESDM
• 2012, CFD Expert in Simulation of Rob Simulation on Muara Karang PLTU/PLTGU, PusLitBang? PLN
• 2012, CFD Expert in Thermal and Sediment Dispersion Study of PLTU Tarakan 2x7MW, PT Adhikarya
• 2012, CFD Expert in Thermal and Sediment Dispersion Analysis of Pantura Reclamation Effect on Muara
  Karang PLTU/PLTGU Cooling Water System Project, PusLitBang? PLN
• 2011, Finite Element Analysis of Pipe Bulging, PT PGN
• 2011, CFD Expert in Sediment Dispersion Analysis of Riau Tenayan PLTU Jetty Project, PT Rekayasa Industri
• 2011, CFD Expert in Thermal and Sediment Dispersion Analysis of Pantura Reclamation Effect on Muara
  karang and Tanjung Priok PLTU/PLTGU Cooling Water System Project, PusLitBang PLN
• 2010, Project Leader in CFD Analysis of Dual Fuel System of Gas Turbine Combustor, UBP Priok PT.
  Indonesia Power
• 2009, Project Leader in Pipe Stress Analysis (Buried Pipeline), PT Fastrack
• 2009 – Francis Turbin Design and Analysis Using CFD, Consultant and Lead Instructur , PT Poso Energy
  (Bukaka Group)
• 2009, Pipe Stress Analysis Using CAESAR II : Statics and Dynamics, Consultation and Training, Lead
  Instructur, BPTKS (Formerly LUK) BPPT
• 2009, Pipe Stress Analysis Using CAESAR II : Statics , Consultation and Training, Lead Instructur, PT. Pupuk
  Kaltim
• 2010, Project Leader in Reclamation Effect (near Intake Pool) on Cooling Water System Thermal Dispersion
  of PLTU Suralaya 8 , PT Rekayasa Industri
• 2008-2009, CFD Project Leader : A 100KW Wind Turbine Blade Design and Analysis, P3TKEBT, Departemen
  Energi dan Sumber Daya Mineral, Republik Indonesia.
• 2000- 2007, Visiting Professor for Graduate Study Program – National Institute of Technology Malang
• 2007-2008, CFD Project Leader : Cooling Water Intake Pool Design and Analysis of A Coal Fired Power Plant
  Funded by PT. Rekayasa Industri
• 2007, Project Leader in CFD modeling for Cooling Water Intake Pool of PLTU Suralaya 8 , PT Rekayasa
  Industri
• 2006, Project Leader in CFD modeling for Heat Dispersion in PLTU Pelabuhan Ratu, Sukabumi PT PLN
  Engineering
• 2006, Project Leader in CFD modeling for Heat Dispersion in PLTU Indramayu , PT PLN Engineering
• 2006, Project Leader in CFD modeling for Heat Dispersion in PLTU Tuban , PT PLN Engineering
• 2006, Project Leader in CFD modeling for Heat Dispersion in PLTGU Teluk Lembu, Jambi LEMTEK FTUI
• 2006, Project Leader in CFD modeling for Heat Dispersion in PLTU Takalar , Centunion (Spain) & PT PLN
  Engineering
• 2005, Research Supervisor-National? Science and Technology Institute Jakarta
• 2005, Project Leader in CFD modeling for Heat Dispersion in PLTU Muara Karang, TEPSCO (Japan)
• 2005, Project Leader in CFD Modeling of Coal Fired Boiler of PLTU Suralaya, PT Indonesia Power UBP
  Suralaya
• 2004, Research Supervisor-Indonesia? Institute of Technology
• 2004, Project Leader in the Study of Mathematical Model of Thermal Dispersion in Palu Coastal Area,
  IndoPower International
• 2004, Project Leader in the Study of Mathematical Model of Thermal Dispersion in Kendari Coastal
  Area,IndoPower International
• 2004, Project Leader in the Study of Mathematical Model of Thermal Dispersion in Sorong Coastal
  Area,IndoPower International
• 2004, Project Leader in the Study of Mathematical Model of Thermal Dispersion in Pangkal Balam Coastal
  Area,IndoPower International
• 2004, Project Leader in the Study of Mathematical Model of Thermal Dispersion in Bangka Coastal
  Area,IndoPower International
• 2004, Project Leader in the Gas Burner Simulation of Tanjung Priok PLTG Unit, PT Indonesia Power UBP. Tg.
  Priok
• 2004, Project Leader in Solution of Mathematical Modeling of Thermal Dispersion in Cilegon Coastal Area,
  PLN-E
• 2003, Chairman of Organizing Committe The 14th International Symposium on Transport Phenomena
  (ISTP-14)
• 2002 Director of CCIT-FTUI
• 2002,Founded CCIT-FTUI
• 2000, Head of FTUI Computer Centre
• 2001-2003, Research Supervisor-Tarumanegara University
• 2001, Chairman of The 4th Quality in Research
• 2001, External Examiner for Mechanical Engineering Master Degree, University of Tasmania, Australia
• 2001, Organizing Committee Chairman of International Conference on Urbanization in cooperation with The
  University of Melbourne, Australia
• 2000, Chairman of The 3rd Quality in Research
• 1998-1999, Guest Lecture at Trisakti University
• 1996 – 2004, CFD Lead Instructor, FTUI
• 1996 – 2000, Head of Fluid Mechanics Laboratory, Mechanical Engineering FTUI
• 1996, Guest Lecture at University Technology Malaysia
• 1992 – 1996, CFD Engineers of CFD Development project, University Technology Malaysia
• 1991-1992, Head of Computational Lab. Mechanical Engineering FTUI
• 1991-1992, Laboratory Practice Coordinator, Mechanical Engineering FTUI
• 1991-1992, Training Coordinator, Mechanical Engineering FTUI
• 1989-1991, Technical Assistant in Fluid Mechanics Laboratory, Mechanical Engineering FTUI

• 2014, Pengembangan Turbin Mikro Bio-Energi (Ministry of Education Grant)
• 2014, Turbin Multi-Fluida (HAKI – Registered)
• 2013, Analisis Ilmu Rekayasa (Unpublished-DTM-UI Research Grant)
• 2012, Analisa Boiling Corrosion Pada Alat Penukar Kalor Tipe Shell & Tube dengan Metode CFD, Temu
  Ilmiah Nasional Dosen Teknik (TINDT) 2012, Jakarta, Indonesia
• 2012, Wind Turbine for Zero Energy Building in Indonesia (DRPM-UI Grant)
• 2011, 100kW Wind Turbine Blade Design (HAKI)
• 2011, Analisis Unjuk Kerja Kompressor Sentrifugal dan Ruang Bakar Turbin Gas Mikro Proto X-1, SNTTM X,
  Malang, Indonesia